Monitor Audio Subwoofer Platinum PLW215 II

  • $8,995.00


The PLW215 II will help you to re-live the air-bending effect of Mother Nature’s own subwoofer within your listening room. Twin 15” C-CAM drivers, triple-suspended for a full 4cm of excursion and individually powered by DSP-controlled amplifiers, will deliver clean frequencies down to 16Hz. At this level, bass arrives with a percussive impact that you feel from head to toe, seamlessly extending even the PL500 II to deliver breath-taking audio resolution beyond the limits of your audible range, but with a physical dimension that absorbs the senses. Put simply, it’s the sound of nature, vividly re-created.

Features and specifications

  • Twin 15” C-CAM drivers, triple-suspended for a full 4cm of excursion
  • A dedicated DSP-controlled amplifier powers each driver
  • Low Frequency Limit: (-6dB - IEC 268-13) -3dB @ 23Hz / -10dB @ 18Hz (Free Field) default preset: Music, -3dB @ 19Hz / -10dB @ 16Hz (In Room) default preset: Music, Limited by low frequency protection filter (-3dB @ 12Hz)
  • Upper Frequency Limit: -3dB @ 150Hz
  • Power consumption: Maximum 1200W, Standby <0.5W (ErP compliance)
  • Low pass filter: 2nd or 4th order (12 or 24 dB/Octave), Increments of 5Hz from 35Hz to 135Hz
  • Phase control: 0-360 degrees, Increments of 15 degrees with a pure invert at 180 degrees
  • SubConnect software: adjust in-room response using top panel dial or laptop
  • 4 user presets per input, including preset Flat/Music/Movie/Impact modes
  • Night Mode: actively reduces dynamic range of louder sections to desired level
  • High current Switch mode power supply (SMPSU)
  • 12v trigger in (3.5mm mono mini-jack, 6v threshold)
  • IR remote included, IR receiver on front panel
  • 3.5mm microphone input jack, microphone included
Dimensions: 
  • External Dimensions: 21.50" H x 19.81" W x 20.19" D 
  • Weight (Individual) 126.63  lbs

Finishes: Santos Rosewood Lacquer,  Natural Ebony Lacquer or Piano Black Gloss Lacquer

Warranty: 5 years parts and labour against manufacturing defects in material or workmanship only.